Grounding Audit Report | Interstates | Web

Section 3: Appendix A: Planview Drawings

The following planviews show the overall facility broken down into individual drawings. Each drawing show’s locations on site for the areas in which touch resistance tests were conducted as well as the test points where the clamp on meter was used for ground resistance. Note that the backgrounds for these drawings are schematic in nature and are intended to show the areas tested and the approximate ground locations for some points. These drawings should not be used for exact measurements or scaling.

CLIENT NAME, FACILITY LOCATION GROUNDING REPORT

Page 17 of 23

INTERSTATES MONTH XX, XXXX

Powered by